Home Lab,  Networking,  Product Review

Flint 4 (GL-BE14000)… It’s time to upgrade from your off the shelf router

Over the last few months I have been fortunate enough to be able to test out a few new routers and firewalls within the market. One that caught my eye for a long time with that being the Flint 4 after already being a fan of their other equipment and seen many home lab enthusiasts also leaning toward the GL.iNet brand.

I was fortunate enough to be able to get a sample loan device so I could test out some of the real world examples and run it through its paces. This is where I also had to make a slightly more tough decision than usual to not just rush a post out as I wanted to actually replace my current appliance and then also get some real world feedback and experiences over a period of time.

Unboxing

So firstly lets start with the unboxing process and I must say the experience was nice and in ways the box reminded me of the older 90s game style boxes and the experience on getting all the parts out from the inside.

Once unboxed the router had a good weight to it and felt robust, especially compared to many of the ISP included routers

This is where I then became super impressed as the setup I did not even need an app or device, due to the onboard screen I was able to configure most options for most people straight out the box to get up and running. I do cover the app experience later on

As you can confirm from the above carousel it was only a matter of minutes to get things in the right place even being able to change the WiFi SSID and its password, the device local login and then also a PIN number to prevent changes with the local screen.

Exceptional WiFI performance

I did do another few tweaks and setups before this screenshot but I made sure I had the WiFi 7 enabled and I was within a few meters of the device but this alone coloured me impressed. I will cover off the ISP configuration later as that deserves a topic in its on right

I did also manage to get quick speeds over my testing period but this was really impressive especially with the thick walls we have in our house.

Adding Fibre SFPs

As you can see the unit itself has ports for days! This is one of the reasons I was attracted to the unit along with the SFP+ connectivity. In my case I did utilise both of the WAN ports and these performed as expected and the SFP port yet again managed to really be a hit. I did try this with a couple of different vendor SFP modules and they all seemed to come up quickly and as expected when I connected this to various devices especially my Unifi switch.

As you can see below I setup both WAN connections once I was connected up to my main switch just before recreating some of the VLANs that are not managed by my Unifi switch.

Outstanding PPPoE performance

This once again is where the device starts working in its strides as over the period of testing I had no issues using PPPoE. Some devices I have used in the past have beeb constrained by the CPU or RAM and you lose speeds with the overhead but the Flint 4 really shone and was more than capable to show my sustained 2.5gbe speeds.

If you happen to be on Zen or a CityFibre connection like myself then if you press the modify option and then select PPPoE and follow the above screenshot to get this up and going. You may get a address via DHCP like I did but then I was not able to easily get the rest of my static IPs to work. You can usually find your username and password in the signup email but do remember to select VLAN 911 or once again I could not get the connection to come up cleanly. Many UK ISPs do start to seem to be supporting your own routers and some even just set everything up with DHCP once you plug in. I do believe you can do the same with BT/EE and the username format is in their support portal.

Balancing Connections

Before I cover off VLANs I am going to make a quick segue into the load balancing too, as for a while I did not have this working as expected but after looking through some of the KBs it is done by a ratio system.

In my example here I wanted every 10 connections to head out the primary WAN and then 2 to head out of my secondary with the last two being there if they are up. Set the numbers to equal if your connections are the same speed. One thing I would love to see if the ability to maybe even have a 3rd wired connection but I am sure I could do this in the CLI if I really needed it.

The insights into devices appear quickly and you want to also make sure things appear in here if you want to cover off some of the parental control features.

That said the stats that it collects are really useful and you can quickly breakdown where the most data is being used from your devices or who may be hogging all the bandwidth.

The next two features are still in beta but the content filter worked well in my testing to ensure that the key things are blocked for some of the users of the networks.

The parental controls work well but you may need to create multiple lines for different users and services depending on when you want the restrictions to come into effect.

Unfortunately I was not able to try the Bark service they offer for parental controls as its not available in my region but AdGuard Home was included. If you want more granular controls and updates for now then I can suggest trying this out as it works incredibly well. As you can see even with just running this for a few days many thing were blocked on the network

App Experience

The mobile app worked well for me and most things above I could change easily especially if I needed to block Youtube or Social media as chores at home have not been done. I was also able to easily monitor most things and see what was going on

VLANs and Home labs

Now onto VLANs and this again is where I have a slightly different setup as I try to keep all my home lab VLANs on my Unifi switch and then some key ones on my router to keep a split. This is also to allow me to test and trial out other firewalls and bench test them.

As you can see its super easy to create new VLANs but just selecting the subnet menu under network and then pressing add at the top

Once the VLANs are configured you need to head over to the Ethernet Port section and then click the little cog to assign them to the relevant uplinks or connections you needed. Once again this is what can really help elevate this above other routers as you can isolate your IoT devices or maybe even a DMZ if you are self hosting things.

Also if you do have VLANs that you want to traverse them do not forget to head over to security and the ACL section to make sure you have the zones configured.

From this screen you may have noticed a VLAN4040 and this the Layer 3 Inter-VLAN Routing Unifi uses https://help.ui.com/hc/en-us/articles/360042281174-Layer-3-Routing

If you try to do this out of the box then you get the following error

I logged a ticket with support and the explained on the firmware I had at the time of writing and they very promptly let me know the GUI only supports from 1-4000 with anything above currently being set aside for their own use. They did take note of this VLANs as they knew other home lab enthusiasts may have a similar set up. The support team were also very good and provided a workaround via SSH and changing some configuration but I also wanted a GUI way so I could also easily set this up if a firmware ever had any breaking changes. This is now where the true power of this router comes in for people who like to tinker. They are based on OpenWRT so if you head down to advanced settings you get the below screen

You can then enter LuCI and start digging around in the more advanced features. This is where I was able to set up the VLAN and with the ACL changes on top quickly gain access to my home lab again

The first thing is to setup the VLAN so head to Network, Interfaces and then head into Devices. Scroll to the bottom and Add device configuration copying in the details like above. You will need to substitute the existing device to whatever you are uplinking to the switch but in my case this is the SFP module.

Once that is set head back to the interfaces tab at the top and then head down to Add new interface and copy in the above details selecting save. Again your device maybe ethX so change this out if required.

Finally head into Network at the top and then Static Routes adding in your networks hosted by Unifi with above being examples so change these for your own.

We now need to ensure this is tagged correctly so head into Network and then Switch ensuring that 4040 is showing as tagged

Just before we save we also just want to validate that the firewall with allow the traffic to work as expected especially from a VPN. You can find this under Network and then Firewall selecting Edit on the LAN Zone ensuring that VLAN4040 is in the allow forward to destination zone. You will also need to select VLAN 4040 and allow this out to the WAN or you may not be able to view the web from any of your static routes. Finally hit Save&Apply to get things up and running.

VPNs and Static IPs

Speaking if VPN configuration this was super easy to set up from the GUI by selecting VPN and then your whatever one suits your needs better. I found WireGuard seems to work better for my uses especially for clients and their own routers so I can tunnel everything when I am out an about

One other thing I did whilst I was in LuCI was setting up my extra static IPs my ISP offer me.

This menu is under Network then Interfaces selecting Add new interface at the bottom. From here select your WAN port or in my case the PPPoE connection with the protocol of static address and then I found listing out each on in a /32 was useful later on for when I wanted to push a service to an IP

To setup a port forward with your new IPs setup head to Network then Firewall, within here I already have some example set but select Port Forwards and then Add at the bottom

In this screen enter the details of your service and where you want it to go, your internal and external port may not match depending on what you are running

Once the first screen is filled in select advanced settings and assign this to one of your external IP addresses, you may also need to tinker with the Loopback Source IP depending on how your service is expecting to see the connection.

Some little Extras

Another feature that I have already alluded to was the fact this works with their other devices such as the Beryl series of which I went for the Beryl 7. This is super handy as it means if I am travelling I can either hotspot to the venue wifi or use my hotspot and then tunnel everything back securely via my home connection. It also means if there are services I want to host at home but not necessarily expose or access with devices that can not use a VPN I can still use these. Below is a fun example of the fact I ran out of books I had synchronised to by Kobo e-reader and transferred these over Starlink in a place with limited connectivity.

Also as for little extras I did love the way the device booted and you could see the icon changing

Tethering

One last feature I wanted to call out is the fact the side USB ports seem to also work really well for tethering just like their mobile routers which is no surprise. This came in really handy with the recent weather and when I was having an upgrade to my connection of which I could continue to work and did not have to change anything to my home setup. Do remember to check with your mobile provider that they support this and you will not get any unexpected bills.

So that is it for part 1 as I found that this ended up being a lot longer than I anticipated with hindsight I should have done this is staged releases but we are always learning. I can highly recommend the unit to anyone wanting to get more out of their connection or even if you want a secure VPN that you can use back to your house when you are out and about. The device is more than capable and with the fact underneath it is running OpenWRT there are many extra features you can expose if you are willing to tinker. I know one thing I will be doing is adding Netbird to this once it is supported as that would help with further ways for me to tunnel into services and would help others if they are behind a CGNAT.

For now the unit is going to go to a new home so I can do further testing on the site to site VPN features and also look at running a few container and point to point performance metrics to really give it a hard workout. With the initial tests I did not want it to impact the performance but the first things things I have tried there does not appear to be much of an impact. So do not delay and go purchase today to upgrade yourself to a happy internet home

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.